The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献   

Chemical Procedures for Rhenium Extraction from Geological Samples: Optimising the Anion Resin Bead Clean‐up Step     

Gang Yang  Aaron Zimmerman  Nicole C. Hurtig  Svetoslav V. Georgiev  Vineet Goswami  Judith L. Hannah  Holly J. Stein 《Geostandards and Geoanalytical Research》2020,44(2):231-242

Rhenium–osmium geochronometry for samples with low Re and complex matrices requires improved Re extraction methods. Here, we investigate plausible controls on efficiency and efficacy of Re extraction during our anion resin bead purification. Four different protocols are compared, each isolating a single variable to test. Rhenium concentrations for solutions at each step of each protocol document differences in chemical recovery/yield. The negative‐thermal ionisation mass spectrometry (N‐TIMS) signal intensity serves as a proxy for Re yield and purity. These data document correlations between the N‐TIMS signal intensity and (a) the duration of anion resin bead conditioning prior to loading with Re‐bearing solution, and (b) both duration and strength of nitric acid used during rinsing of the Re‐loaded anion resin bead. The optimal protocol improved Re signal intensity around fourteen times compared with our current Re extraction protocol, an aggregate of 2.4 times improvement in chemical recovery (yield) and 5.8 times improvement in emission efficiency (purity). Repeated N‐TIMS isotopic measurements on our in‐house Re standard solution (1407) verify that our optimal protocol‐3 does not fractionate Re isotopes. The improved anion resin bead method considerably lowers the Re detection limit and allows Re‐Os isotopic analysis of picogram‐level Re hosted in geological samples with complex matrices.  相似文献   

地震后水汽异常变化初探     

王勇  任栋  娄泽生  郝振航 《大地测量与地球动力学》2019,39(9):881-883

研究东日本地震、汶川地震和玉树地震震中及其附近区域在地震前后的水汽时间序列变化。首先分析震中MODIS水汽序列和震中附近探空站点水汽序列在地震前后的变化；然后基于GNSS ZTD与水汽之间的高相关性，以GNSS ZTD代替GNSS水汽，讨论震源区周围IGS站点的ZTD序列变化。研究发现，震后震中及其附近区域水汽值变化出现异常，且距离越近所受影响越大；水汽不断聚积，达到峰值后发生降水。  相似文献   

茅山竹矿断层气定点观测场地勘选     

戴波  吴晓峰  张敏  孟科 《大地测量与地球动力学》2019,39(11):1202-1206

拟在茅山断裂带沿线布设若干个断层气连续观测点，建组断层气观测网。以茅山竹矿地区为例，通过断层气测量的初步结果，结合地质、人工地震、跨断层短水准等多种手段联合分析研究区断层的活动性，从而确定断层气定点观测的点位，为组建断层气观测网的选点提供借鉴和参考。  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献   

青岛台体应变短周期气压系数变化原因探讨     

岳龙  徐清风  臧艺博  李志强  刘云  李炜  孙忠礼 《大地测量与地球动力学》2020,40(7):765-770

青岛台体应变短周期(小于128 min)气压系数2018-01出现阶变，通过对观测系统、台站周边施工情况、监测环境等逐项现场核实，排除观测系统、周边施工的影响。利用离散小波变换和回归分析发现，钻孔水位的气压系数与体应变气压系数同步阶变，结合台站钻孔施工当天体应变钻孔水位变化、体应变趋势变化、其他相邻台站水位气压系数变化等数据认为，台站钻孔施工是导致体应变气压系数变化的原因，并定性分析其变化机理。  相似文献   

波浪作用下沉积物中氮、磷释放速率的试验研究     

张严严  房文艳  许国辉  任宇鹏  许兴北 《中国海洋大学学报(自然科学版)》2020,50(4):102-110

湖泊或海湾中的沉积物吸附氮(N)、磷(P)等元素所形成的沉积层成为水体富营养化的內源。在波浪作用下,尤其是强浪作用下,沉积物中的N、P会通过内源释放作用大量进入水体中。本文在自制的U型水槽中开展实验,采用不同水头差来模拟波浪的循环荷载作用,研究了沉积层中的N、P在静置固结状态(Ⅰ)、加波未液化状态(Ⅱ)、加波液化状态(Ⅲ)下的释放规律,并给出该试验条件下的沉积物释放速率的拟合方程。试验结果表明:沉积物中总氮(TN)和溶解性总氮(TDN)的释放速率会随着水动力作用的增强而增加;总磷(TP)、溶解性总磷(TDP)和活性磷酸盐(SRP)的释放速率也随着水动力作用增强而增加,但水体中悬浮物(SS)含量过高会限制其释放速率。  相似文献   

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS     

Ya‐Jun An  Xin Li  Zhao‐Feng Zhang 《Geostandards and Geoanalytical Research》2020,44(1):183-199

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.  相似文献   

Main active faults and seismic activity along the Yangtze River Economic Belt: Based on remote sensing geological survey     

《China Geology》2020,3(2):314-338

The Yangtze River Economic Belt (YREB) spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and present-day crustal deformation. Active faults and seismic activity are important geological factors for the planning and development of the YREB. In this paper, the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings, using both remote-sensing data and geological survey results. The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed. The main active fault zones in the western YREB, together with the neighboring regional active faults, make up an arc fault block region comprising primarily of Sichuan-Yunnan and a “Sichuan-Yunnan arc rotational-shear active tectonic system” strong deformation region that features rotation, shear and extensional deformation. The active faults in the central-eastern YREB, with seven NE-NNE and seven NW-NWW active faults (the “7-longitudinal, 7-horizontal” pattern), macroscopically make up a “chessboard tectonic system” medium-weak deformation region in the geomechanical tectonic system. They are also the main geological constraints for the crustal stability of the YREB.  相似文献   

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry     

Katharina Marger  Matthieu Harlaux  Andrea Rielli  Lukas P. Baumgartner  Andrea Dini  Barbara L. Dutrow  Anne‐Sophie Bouvier 《Geostandards and Geoanalytical Research》2020,44(3):593-615

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).  相似文献